Tel: +86 574 23619802 | Fax: +86 574 56877834 | Email: sales@pneuflexfittings.com
Connection Solutions Expert: Push in Fittings, Push to Connect Fittings and Tubing

Tel: +86 574 23619802

Fax: +86 574 56877834

Email:

Sales@pneuflexfittings.com

Pneuflexfittings@yahoo.com

Or contact Us with below form (thanks message comes out after sending, or faild)





Nickel Plated Brass Push in Fittings, Push to Connect Fittings

Nickel Plated Brass Push in Fittings, Push to Connect Tube Fittings

A solution for pneumatic applications and other fluids in aggressive environment.Brass body with external and internal nickel plating. Pressure is up to 290psi.

Composite Push in Fittings, Push to Connect Fittings (PT, R, BSPT, NPT)


Plastic Push in Fittings come in a variety of types, moulds and sizes to satisfy various tube demands. Accept metric and inch tube, and PT(R, BSPT), NPT thread
Technical Structure                                                    Technical Specifications

     
  Fluid Admitted Air, Vaccum
Working Pressure 0—1.0MPa       0—150psi
Negative Pressure -100Kpa          -29.5 In Hg
Working Temperature 0—60°C            32～140°F
Applicable Tube PU / PA
Body Nickel Plated Brass and PBT
O-ring NBR
Lock Claw Stainless Steel(SUS)
     












    Cautions in Application of Tube Joint
    
Thread Standard and Type

R, PT, BSPT -- 55° Taper Pipe Thread   NPT -- 60° American Standard Taper Pipe Thread
R1/8 R1/4 R3/8 R1/2   NPT1/8 NPT1/4 NPT3/8 NPT1/2
 
Metric Thread
M5 x 0.8 M6 x 1 M8 x 1 M10 x 1 M12 x 1.25 M14 x 1.5 M16 x 1.5 M20 x 1.5

push in fittings • PC     Male Connector
Most general style. In line connection of tubing to a female threaded port. External tightening with a flat wrench or socket wrench, internal adjustment with an Allen wrench.

push in fittings • PL     Male Elbow
Most general style. Connection of tubing at a 90° angle to a female thread. External tightening with a flat wrench.

push in fittings • PLL     Extended Male Elbow
Basically, it is used together with male elbow. Different point is that it is used for with fittings to avoid from interfering with each other by making the piping two-level.

push in fittings • PLF     Female Elbow
In line connection of tubing to a male threaded port. External tightening with a flat wrench.

push in fittings • PLM     Bulkhead Union Elbow
Connection of two tubes through a panel, changing by 90° in a tubing fetching direction.

push in fittings • PCF     Female Connector
In line connection of tubing to a male threaded port. External tightening with a flat wrench or socket wrench.

push in fittings • PB     Male Branch Tee
Connection of two tubes at a 90° angle to a female thread. External tightening with a flat wrench.

push in fittings • PBF     Female Branch Tee
Connection of two tubes at a 90° angle to a male thread. External tightening with a flat wrench.

push in fittings • PD     Male Run Tee
Use to branch line in the same direction from female thread and in 90° direction.

push in fittings • PDF     Female Run Tee
Use to branch line in the same direction from male thread and in 90° direction.

push in fittings • PX     Male Y
Use to branch line in the same direction from female thread.

push in fittings • PXF     Female Y
Use to branch line in the same direction from male thread.

push in fittings • PKB     Male Triple Branch
Use to three-branch lines at right angles from female thread.

push in fittings • PKD     Male Triple Branch Reducer
Use to three-branch lines at right angles from female thread. Different from PKB, connection of two diffenrent ΦD tubes.

push in fittings • PH     Male Banjo
Connection of tubing at a 90° angle to a  female threaded port. Tightened on the top of the fitting by use of a flat wrench or a socket wrench.

push in fittings • PHF     Female Banjo
Use to branch line in the same direction or at the right angles from male or female thread. Multiplex connection possible.

push in fittings • PMF     Bulkhead Female Connector
Use to connect male thread and tube through a panel.

push in fittings • PU     Union Straight
In line connection of two tubes of equal tube ΦD.

push in fittings • PG     Union Straight Reducer
In line connection of two tubes of different tube ΦD.

push in fittings • PV     Union Elbow
Connection at a 90° angle of two tubes of equal tube ΦD.

push in fittings • PVG     Union Elbow Reducer
Connection at a 90° angle of two tubes of different tube ΦD.

push in fittings • PE     Union Tee
Connection at a 90° angle of three tubes of equal tube ΦD.

push in fittings • PEG     Union Tee Reducer
Use to connect tubes with size down in both 90° directions.

push in fittings • PGE    Union Tee Reducer
Use to connect tubes with size down in both 90° directions.

push in fittings • PY     Union Y
In line connection of three tubes of equal tube ΦD.

push in fittings • PW     Union Y Reducer
In line connection of three tubes of different tube ΦD.

push in fittings • PGJ     Plug-in Reducer
Use to change sizes of Push in fittings.

push in fittings • PLJ     Plug-in Elbow
Connection of tubing at a 90° angle to a push-in fitting or cartridge. Useful on pneumatic control valves or cylinders equipped with cartridges.

push in fittings • PYJ     Plug-in Y
Use to branch line in the same direction from Push in fittings. Tube size and Stem size are equal.

push in fittings • PWJ     Plug-in Y Reducer
Use to branch line in the same direction from Push in fittings. Tube size and Stem size are different.

push in fittings • PIJ     Tube Splicer
Connection of two push in fittings that are same Tube ΦD.

push in fittings • PIG    Tube Splicer Reducer
Connection of two push in fittings that are different Tube ΦD.

push in fittings • PKJ Plug-in  Reducer Triple Branch
Use to four-branch line from push in fitting. Tube size and Stem size are same.

push in fittings • PP     Plug
Use to plug unused push in fittings.

push in fittings • PM     Bulkhead Union
Connect two tubes through a panel.

push in fittings • PZA     Union Cross
Distribution of air between 4 tubes at a 90° angle.

push in fittings • PK     Union Branch
Used to five-branch lines. Tube sizes are equal.

push in fittings • PKG    Union Branch Reducer
Used to five-branch lines. Tube sizes are different.



PDF Catalogue Download

Push in Fittings (390.8KB)

Push in Fittings, Pneumatic Push in Fittings, Push to Connect Fittings(PT, R, BSPT, NPT)



【Back】
 
Maybe you're also interested in
ISO9001:2000 Certified; 100% Quality Guarantee.
PNEUFLEX PNEUMATIC CO., LTD is a Professional Manufacturer and Supplier of Push in Fittings, Plastic Push in Fittings, NPT Air Fittings, Inch Push in Fittings, Metric Push in Fittings, Push in Air Fittings, Push in Fittings and Tubing, Pneumatic Push in Fittings, One Touch Tube Fittings, Instant Fittings, Push to Connect Fittings, One Touch Tube Fittings With o-ring, Brass Push in Fittings, Speed Controllers, Metal Push in Fittings, Compact One Touch Fittings, Miniature (Mini) Push in Fittings,  PU Tubing, Nylon Tubing, Sintered Silencer, Air Mufflers, Hand (Shut-Off) Valves, Air Blow Guns, Pneumatic Fittings, Check Valves, Stop Valves, Stainless Steel Push in Fittings, Water Purifier Fittings, Water Push in fittings, Flow Regulation Valves and Pneumatic Valves in China.                                                                                                                    Learn more...
Fittings Tubing Valve Accessories
Plastic Air Fitting
Brass Quick Fitting
Stainless Steel Fitting
Quick Coupler		 Polyurethane
Nylon
Polyethylene
Polyether		 Speed Control
Mini Ball Valve
Check Valve
Stop Valve		 Sintered Bronze Muffler
Silencer
Air Gun
Tube Cutter