Pneuflex has official distributors in 30+ countries
Distributor Login
PEG 16-14 | 16mm to 14mm Union Tee Reducer Push to Connect Fitting
16mm - 14mm union tee reducer push to connect fitting is used to connect three tubes with size down in both 90 degree directions. Tubing O.D in middle is 14mm and another two inline tubings are 16mm.
Product Specifications
| Applicable Tubing O.D.1: | 16mm |
| Applicable Tubing O.D.2: | 14mm |
| Fluid Admitted: | Air, Vaccum, Water(no freezing) |
| Body Material: | PBT Plastic |
| Seal Material: | NBR |
| Working Pressure: | 0∼1.0MPa | 0∼150psi |
| Proof Pressure: | 3.0Mpa | 435psi |
| Negative Pressure: | -100Kpa | -29.5 In Hg |
| Working Temperature: | -20∼80°C | -4∼176°F |
| Lock Claw: | Stainless Steel (SUS) |
| Applicable Tube: | PU / PA / PE / PVC |
- Technical Data
- Downloads
Dimensions of PEG 16-14 | 16mm to 14mm Union Tee Reducer Push to Connect Fitting
| Part No. | Applicable Tubing O.D.1 | Applicable Tubing O.D.2 |
| PEG 16-14 | 16mm | 14mm |
* Information contained herein may be changed without prior notification. Please contact us for confirming accurate dimensions.