PK 3/8 | 3/8 Union Branch Push to Connect Fitting
3/8" O.D tube union branch push to connect fitting is used to connect two 3/8" O.D tubing connections on both ends in straight line and three 3/8" O.D tubing on the branch with same diameter at right angles. 3/8" O.D tubing x 3/8" O.D tubing union branch push to connect fitting is made of strong thermoplastic (PBT) and stainless steel tube gripping claw. 3/8" O.D tubing union branch connector push to connect fitting is the most intuitive way of connecting tubes to a fitting in order to create a fluid distribution network.
Product Specifications
| Applicable Tubing O.D.: | 3/8" |
| Fluid Admitted: | Air, Vaccum, Water(no freezing) |
| Body Material: | PBT Plastic |
| Seal Material: | NBR |
| Working Pressure: | 0∼1.0MPa | 0∼150psi |
| Proof Pressure: | 3.0Mpa | 435psi |
| Negative Pressure: | -100Kpa | -29.5 In Hg |
| Working Temperature: | -20∼80°C | -4∼176°F |
| Lock Claw: | Stainless Steel (SUS) |
| Applicable Tube: | PU / PA / PE / PVC |
Category: Composite Push to Connect Fittings / PK Union Branch
