PU 05 | 5mm Union Straight | 5mm Push to Connect Fitting
5mm union straight push to connect fitting is used for connecting two 5mm O.D tubes inline in compressed air circuits. 5mm push to connect fitting can be fitted quickly and simply by pushing the tube directly in pneumatic systems. To connect, simply push the tube until its bottom, stainless steel lock claw built inside grips tube and hold it firmly. To release the tube, press the release sleeve on the fitting and tube could be easily pulled out.
Product Specifications
| Applicable Tubing O.D.: | 5mm |
| Fluid Admitted: | Air, Vaccum, Water(no freezing) |
| Body Material: | PBT Plastic |
| Seal Material: | NBR |
| Working Pressure: | 0∼1.0MPa | 0∼150psi |
| Proof Pressure: | 3.0Mpa | 435psi |
| Negative Pressure: | -100Kpa | -29.5 In Hg |
| Working Temperature: | -20∼80°C | -4∼176°F |
| Lock Claw: | Stainless Steel (SUS) |
| Applicable Tube: | PU / PA / PE / PVC |
- Technical Data
- Downloads
Dimensions of PU 05 | 5mm Union Straight | 5mm Push to Connect Fitting
| Part No. | Applicable Tubing ΦD | ØP | B | L | O1 | O2 | C |
| PU 05 | 5mm | 13.5 | 36 | 15.9 | 13.8 | 12.4 | 11.8 |
* Information contained herein may be changed without prior notification. Please contact us for confirming accurate dimensions.
Category: Composite Push to Connect Fittings / PU Union Straight
