PU 1/2 | 1/2 Inch Union Straight | 1/2 Inch Push to Connect Fitting
1/2 inch union straight push to connect fitting is used for connecting two 1/2" O.D tubes in the same direction. Stainless steel gripping claw, collar and release sleeve offer a quick hold and release mechanism to provide a low disconnection force for easy removal of tube without causing damage to the tube. 1/2 inch push to connect fitting is an essential part in pneumatic and fluid system. Body of 1/2" union straight push to connect fititng is made of strong thermoplastic (PBT) and designed to use with PU, Nylon, PE, PVC, Teflon tubing...
Product Specifications
| Applicable Tubing O.D.: | 1/2" |
| Fluid Admitted: | Air, Vaccum, Water(no freezing) |
| Body Material: | PBT Plastic |
| Seal Material: | NBR |
| Working Pressure: | 0∼1.0MPa | 0∼150psi |
| Proof Pressure: | 3.0Mpa | 435psi |
| Negative Pressure: | -100Kpa | -29.5 In Hg |
| Working Temperature: | -20∼80°C | -4∼176°F |
| Lock Claw: | Stainless Steel (SUS) |
| Applicable Tube: | PU / PA / PE / PVC |
- Technical Data
- Downloads
Dimensions of PU 1/2 | 1/2 Inch Union Straight | 1/2 Inch Push to Connect Fitting
| Part No. | Applicable Tubing ΦD | ØP | B | L | O1 | O2 | C |
| PU 1/2 | 1/2" | 21 | 48.5 | 22.8 | 23 | 20.5 | 19.8 |
* Information contained herein may be changed without prior notification. Please contact us for confirming accurate dimensions.
Category: Composite Push to Connect Fittings / PU Union Straight
