PK Union Branch | Push to Connect Fitting

Union branch push to connect fitting is used for in-line distribution of air to three tubing connections at a 90° angle to the supply line with the same tube diameter. Union branch pneumatic push to connect fitting is made of strong thermoplastic (PBT) and have stainless steel tube gripping claw. Union triple branch push to connect fitting is push-to-connect quick connect and quick release. Simple installation--push the tubing in, and the connection is complete. To release the tubing, press the release sleeve on the fitting, and you can easily pull the tube out. Accommodate metric tubing O.D ranging from 4 mm to 12 mm, inch tubing O.D ranging from 1/8" to 1/2".

Product Specifications

Fluid Admitted:	Air, Vaccum, Water(no freezing)
Body Material:	PBT Plastic
Seal Material:	NBR
Working Pressure:	0∼1.0MPa | 0∼150psi
Proof Pressure:	3.0Mpa | 435psi
Negative Pressure:	-100Kpa | -29.5 In Hg
Working Temperature:	-20∼80°C | -4∼176°F
Lock Claw:	Stainless Steel (SUS)
Applicable Tube:	PU / PA / PE / PVC