PU 1/8 | 1/8 Inch Union Straight | 1/8 Inch Push to Connect Fitting
1/8 inch union straight push to connect fitting is widely used in pneumatic system. 1/8 inch union straight push to connect fitting is made of strong thermoplastic (PBT). Stainless steel tube gripping claw built inside 1/8 push to connect fitting provides a quick and tight hold. 1/8 inch push to connect fitting is used to connect two 1/8 inch O.D tubes at two ends in the same direction and allows to connect and disconnect 1/8 tubing easily without hurting tubing.
Product Specifications
| Applicable Tubing O.D.: | 1/8" |
| Fluid Admitted: | Air, Vaccum, Water(no freezing) |
| Body Material: | PBT Plastic |
| Seal Material: | NBR |
| Working Pressure: | 0∼1.0MPa | 0∼150psi |
| Proof Pressure: | 3.0Mpa | 435psi |
| Negative Pressure: | -100Kpa | -29.5 In Hg |
| Working Temperature: | -20∼80°C | -4∼176°F |
| Lock Claw: | Stainless Steel (SUS) |
| Applicable Tube: | PU / PA / PE / PVC |
- Technical Data
- Downloads
Dimensions of PU 1/8 | 1/8 Inch Union Straight | 1/8 Inch Push to Connect Fitting
| Part No. | Applicable Tubing ΦD | ØP | B | L | O1 | O2 | C |
| PU 1/8 | 1/8" | 11 | 33 | 13.8 | 12 | 10.4 | 9.8 |
* Information contained herein may be changed without prior notification. Please contact us for confirming accurate dimensions.
Frequently requested together with PU 1/8 | 1/8 Inch Union Straight | 1/8 Inch Push to Connect Fitting
- PU 1/8
- Push to Connect Fitting
Category: Composite Push to Connect Fittings / PU Union Straight
