Filter Push to Connect Fittings | Pneumatic Tubing

PKG 3/8-5/16 | 3/8 to 5/16 Union Branch Reducer Push to Connect Fitting

3/8" O.D tubing x 5/16" O.D tubing union branch reducer push to connect fitting is used for in-line distribution of air to three smaller diameter tubing connections at a right angle to the supply line. 3/8" O.D tubing x 5/16" O.D tubing union branch...

PKG 5/16-1/4 | 5/16 to 1/4 Union Branch Reducer Push to Connect Fitting

5/16" O.D tubing x 1/4" O.D tubing union branch reducer push to connect fitting is used for in-line distribution of air to three smaller diameter tubing connections at a right angle to the supply line. 5/16" O.D tubing x 1/4" O.D tubing union branch...

PM 04 | 4mm Bulkhead Union - 4mm Push to Connect Fitting

4mm bulkhead union push to connect fitting is used to connect two 4mm tubing on both ends through a panel or other barrier. Bulkhead union fitting is used when there is a need to move 4mm tubing through some obstacle. Simply drill a hole, push one part...

PM 05 | 5mm Bulkhead Union - 5mm Push to Connect Fitting

5mm bulkhead union push to connect fitting is used to connect two 5mm tubing on both ends through a panel or other barrier. Bulkhead union fitting is used when there is a need to move 5mm tubing through some obstacle. Simply drill a hole, push one part...

PM 06 | 6mm Bulkhead Union - 6mm Push to Connect Fitting

6mm bulkhead union push to connect fitting is used to connect two 6mm tubing on both ends through a panel or other barrier. Bulkhead union fitting is used when there is a need to move 6mm tubing through some obstacle. Simply drill a hole, push one part...

PM 07 | 7mm Bulkhead Union - 7mm Push to Connect Fitting

7mm bulkhead union push to connect fitting is used to connect two 7mm tubing on both ends through a panel or other barrier. Bulkhead union fitting is used when there is a need to move 7mm tubing through some obstacle. Simply drill a hole, push one part...

PM 08 | 8mm Bulkhead Union - 8mm Push to Connect Fitting

8mm bulkhead union push to connect fitting is used to connect two 8mm tubing on both ends through a panel or other barrier. Bulkhead union fitting is used when there is a need to move 8mm tubing through some obstacle. Simply drill a hole, push one part...

PM 09 | 9mm Bulkhead Union - 9mm Push to Connect Fitting

9mm bulkhead union push to connect fitting is used to connect two 9mm tubing on both ends through a panel or other barrier. Bulkhead union fitting is used when there is a need to move 9mm tubing through some obstacle. Simply drill a hole, push one part...

PM 1/2 | 1/2 Bulkhead Union Push to Connect Fitting

1/2" O.D tube bulkhead union push to connect fitting is used to connect two 1/2" O.D tubing on both ends through a panel or other barrier. Bulkhead union fitting is used when there is a need to move 1/2" tubing through some obstacle. Simply drill a...

PM 1/4 | 1/4 Bulkhead Union Push to Connect Fitting

1/4" O.D tube bulkhead union push to connect fitting is used to connect two 1/4" O.D tubing on both ends through a panel or other barrier. Bulkhead union fitting is used when there is a need to move 1/4" tubing through some obstacle. Simply drill a...

PM 1/8 | 1/8 Bulkhead Union Push to Connect Fitting

1/8" O.D tube bulkhead union push to connect fitting is used to connect two 1/8" O.D tubing on both ends through a panel or other barrier. Bulkhead union fitting is used when there is a need to move 1/8" tubing through some obstacle. Simply drill a...

PM 10 | 10mm Bulkhead Union - 10mm Push to Connect Fitting

10mm bulkhead union push to connect fitting is used to connect two 10mm tubing on both ends through a panel or other barrier. Bulkhead union fitting is used when there is a need to move 10mm tubing through some obstacle. Simply drill a hole, push one...

PM 11 | 11mm Bulkhead Union - 11mm Push to Connect Fitting

11mm bulkhead union push to connect fitting is used to connect two 11mm tubing on both ends through a panel or other barrier. Bulkhead union fitting is used when there is a need to move 11mm tubing through some obstacle. Simply drill a hole, push one...

PM 12 | 12mm Bulkhead Union - 12mm Push to Connect Fitting

12mm bulkhead union push to connect fitting is used to connect two 12mm tubing on both ends through a panel or other barrier. Bulkhead union fitting is used when there is a need to move 12mm tubing through some obstacle. Simply drill a hole, push one...

PM 3/16 | 3/16 Bulkhead Union Push to Connect Fitting

3/16" O.D tube bulkhead union push to connect fitting is used to connect two 3/16" O.D tubing on both ends through a panel or other barrier. Bulkhead union fitting is used when there is a need to move 3/16" tubing through some obstacle. Simply drill a...

PM 3/8 | 3/8 Bulkhead Union Push to Connect Fitting

3/8" O.D tube bulkhead union push to connect fitting is used to connect two 3/8" O.D tubing on both ends through a panel or other barrier. Bulkhead union fitting is used when there is a need to move 3/8" tubing through some obstacle. Simply drill a...

PM 5/16 | 5/16 Bulkhead Union Push to Connect Fitting

5/16" O.D tube bulkhead union push to connect fitting is used to connect two 5/16" O.D tubing on both ends through a panel or other barrier. Bulkhead union fitting is used when there is a need to move 5/16" tubing through some obstacle. Simply drill a...

PM 5/32 | 5/32 Bulkhead Union Push to Connect Fitting

5/32" O.D tube bulkhead union push to connect fitting is used to connect two 5/32" O.D tubing on both ends through a panel or other barrier. Bulkhead union fitting is used when there is a need to move 5/32" tubing through some obstacle. Simply drill a...

PU 04 | 4mm Union Straight - 4mm Push to Connect Fitting

4mm union straight push to connect fitting is used for connecting two tubes of 4mm O.D in the same direction. 4mm push to connect fitting allows to connect and disconnect tubing easily without causing damage to the tubing. 4mm union straight push to...

PU 05 | 5mm Union Straight | 5mm Push to Connect Fitting

5mm union straight push to connect fitting is used for connecting two 5mm O.D tube inline in compressed air circuits. 5mm push to connect fitting can be fitted quickly and simply by pushing the tube directly in tubing systems. To connect, simply push...